NSE6_FWF-6.4 Questions | Free Practice NSE6_FWF-6.4 Dumps & Exam Prep

Question No 1

Which two statements about distributed automatic radio resource provisioning (DARRP) are correct? (Choose two.)

Choose the Choices:

DARRP performs continuous spectrum analysis to detect sources of interference. It uses this information to allow the AP to select the optimum channel.

DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the AP.

DARRP measurements can be scheduled to occur at specific times.

DARRP requires that wireless intrusion detection (WIDS) be enabled to detect neighboring devices.

Question No 2

Which factor is the best indicator of wireless client connection quality?

Choose the Choices:

Downstream link rate, the connection rate for the AP to the client

The receive signal strength (RSS) of the client at the AP

Upstream link rate, the connection rate for the client to the AP

The channel utilization of the channel the client is using

Question No 3

When configuring Auto TX Power control on an AP radio, which two statements best describe how the radio responds? (Choose two.)

Choose the Choices:

When the AP detects any other wireless signal stronger that - 70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.

When the AP detects PF Interference from an unknown source such as a cordless phone with a signal stronger that - 70 dBm, it will increase its transmission power until it reaches the maximum configured TX power limit.

When the AP detects any wireless client signal weaker than - 70 dBm, it will reduce its transmission power until it reaches the maximum configured TX power limit.

When the AP detects any interference from a trusted neighboring AP stronger that - 70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.

Question No 4

Refer to the exhibits.

Exhibit A

Exhibit B

Exhibit C

A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point - of - sale and IoТ devices. Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs. To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?

Choose the Choices:

Increase the transmission power of the AP radios

Enable frequency handoff on the AP to band steer clients

Reduce the number of wireless networks being broadcast by the AP

Install another AP in the reception area to improve available bandwidth

Question No 5

Which two statements about background rogue scanning are correct? (Choose two.)

Choose the Choices:

A dedicated radio configured for background scanning can support the connection of wireless clients

When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP

Background rogue scanning requires DARRP to be enabled on the AP instance

A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band Answer: A, B Explanation: To enable rogue AP scanning Reference: https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/723e20ad - 5098 - 11e9 - 94bf - 00505692583a/FortiWiFi_and_FortiAP - 6.2.0 - Configuration_Guide.pdf

Free Fortinet NSE6_FWF-6.4 Questions

Question No 1

Question No 2

Question No 3

Question No 4

Question No 5

NSE6_FWF-6.4 Exam Features

NSE6_FWF-6.4 PDF Dumps