Free HP HPE7-A01 Questions

Which feature supported by SNMPv3 provides an advantage over SNMPv2c?

You are doing tests in your lab and with the following equipment specifications • AP1 has a radio that generates a 10 dBm signal • AP2 has a radio that generates a 11 dBm signal • AP1 has an antenna with a gain of 9 dBi • AP2 has an antenna with a gain of 12 dBi. • The antenna cable for AP1 has a 2 dB loss • The antenna cable for AP2 has a 3 dB loss What would be the calculated Equivalent Isotropic Radiated Power (EIRP) for APT?

With Aruba CX 6300. how do you configure ip address 10 10 10 1 for the interface in default state for interface 1/1/1?

A system engineer needs to preconfigure several Aruba CX 6300 switches that will be sent to a remote office An untrained local field technician will do the rollout of the switches and the mounting of several AP - 515s and AP - 575S. Cables running to theAPs are not labeled. The VLANs are already preconfigured to VLAN 100 (mgmt), VLAN 200 (clients), and VLAN 300 (guests) What is the correct configuration to ensure that APs will work properly?

A)



B)

C)

D)

Your Director of Security asks you to assign AOS - CX switch management roles to new employees based on their specific job requirements After the configuration was complete, it was noted that a user assigned with the administrators role did not have the appropriate level of access on the switch. The user was not limited to viewing nonsensitive configuration information and a level of 1 was not assigned to their role Which default management role should have been assigned for the user?