HPE7-A07 Questions | Free Practice HPE7-A07 Dumps & Exam Prep

Question No 1

A customer is evaluating device profiles on a CX 6300 switch. The test device has the following attribute:

• MAC address=81cd9313ab31 The test device needs to be assigned the "lot - prod'' role, in addition the "lot - default" role must be applied for any other device connected lo interface 1/1/1. This is a lab environment with no configuration of any external authentication server for the test. Given the configuration example, what is required to meet this testing requirement?

Choose the Choices:

Enter the command "pot - access device - profile mode block - until - profile - applied"" for interface 1/1/1.

Enter the command "port - access fallback - role lot - default globally

Enter the command "port - access onboarding - method precedence" to set device profiles with a lower precedence.

Enter the command "port - access device - profile mode block - until - profile - applied" globally.

Question No 2

Exhibit.

Which user role will be assigned when a voice client tries to connect for the first time, but the RADIUS server is unavailable?

Choose the Choices:

Question No 3

You configured a WPA3 - SAE with the following MAC Authentication Role Mapping in Cloud Authentication and Policy:

With further default settings assume a new Android phone is connected to the network. Which role will the client be assigned after connecting for the first time?

Choose the Choices:

Question No 4

You are testing the use of the automated port - access role configuration process using RadSec authentication over VXLAN. During your testing you observed that the RadSec connection will fan during the digital certificate exchange What would be the cause of this Issue?

Choose the Choices:

The RadSec server was defined on the switch using an IPv6 address that was unreachable

Tracking mode was set to "dead - only", and the RadSec server was marked as unreachable.

The switch is configured to establish a TLS connection with a proxy server, not the radius server.

The RADIUS TCP packets are Being dropped and the TLS tunnel is not established.

Question No 5

An OSPF router has learned a pain 10 an external network by Doth an E1 and an E2 advertisement Both routes have the same path cost Which path will the router prefer?

Choose the Choices:

The router will prefer the E1 path.

The router will use Doth paths equally utilizing ECMP.

The router will prefer the E2 path.

Both routes will be suppressed until the path conflict has been resolved.

Free HP HPE7-A07 Questions

Question No 1

Question No 2

Question No 3

Question No 4

Question No 5

HPE7-A07 Exam Features

HPE7-A07 PDF Dumps